|
Post by amac733 on Nov 1, 2014 21:46:47 GMT -5
Hello everyone! Long time listener, first time caller I've been reading the boards for awhile and finally picked up my own 01V96! I'm running to my 788T-SSD via AES digital snake (I had it built at Remote Audio, they did a fantastic job!) I'm currently in the middle of my first project using this board and I'm extremely happy! It sounds great and it's flexibility is amazing. I'm wondering how everyone sets up their dynamics? More specifically on your wireless lav channels. Do you use the gate or the compressor/limiters? Thanks in advance for any info or comments! Armando
|
|
|
Post by scottharber on Nov 6, 2014 20:40:36 GMT -5
Hi Armando, First off, I would never use a gate for anything regarding dialog. Second of all, there are basically 2 paths to setup up dynamics/compressors in the 01V96v2 and later. You can, A-set up a compressor as an effect or B-use the compressor in the dynamics section. The effect version works much better but there are only 4 effects so... you can do 8 channels this way as you can patch 4 stereo compressors for a total of 8 channels. That's what I do and run the rest of your channels through the dynamic section and into those compressor. There's a good walk through to set up the effects inserted version of the compressors here; o1v96psug.proboards.com/thread/20/dynamicsHope this helps. Scott Harber
|
|
|
Post by amac733 on Nov 11, 2014 14:34:26 GMT -5
Hi Armando, First off, I would never use a gate for anything regarding dialog. Second of all, there are basically 2 paths to setup up dynamics/compressors in the 01V96v2 and later. You can, A-set up a compressor as an effect or B-use the compressor in the dynamics section. The effect version works much better but there are only 4 effects so... you can do 8 channels this way as you can patch 4 stereo compressors for a total of 8 channels. That's what I do and run the rest of your channels through the dynamic section and into those compressor. There's a good walk through to set up the effects inserted version of the compressors here; o1v96psug.proboards.com/thread/20/dynamicsHope this helps. Scott Harber Thank you, Scott!
|
|